Complete Oil Specifications
Your 2022 Dodge Charger 3.6L V6 requires 5W-20 engine oil meeting the Chrysler MS-6395 material standard.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 5W-20 |
| API Rating | API SP, SN Plus |
| ILSAC Rating | GF-6A |
| Capacity (with filter) | 5.9 quarts |
| Oil Filter | Mopar 68191349AC |
| Normal Interval | 6000-8000 miles |
Why 5W-20 is Critical for This Engine
The 3.6L Pentastar V6 relies on precise oil pressure to properly actuate the variable valve timing system. The 5W-20 viscosity allows the oil to swiftly circulate upon startup while maintaining the correct pressure threshold for the VVT cam phasers.
Using incorrect oil will:
- ❌ Prevent proper variable valve timing functionality
- ❌ Negatively impact fuel efficiency
- ❌ Cause excessive valvetrain noise (ticking)
Dodge-Approved Oil Brands
-
✅ Pennzoil Platinum Full Synthetic 5W-20
-
✅ Mobil 1 Advanced Full Synthetic 5W-20
-
✅ Valvoline Advanced Full Synthetic 5W-20
-
✅ Castrol EDGE 5W-20 Advanced Full Synthetic
-
✅ Pennzoil Gold 5W-20
Chrysler MS-6395 tests heavily for wear and oxidation protection over long intervals. Using oil that explicitly meets this standard is critical for maintaining your powertrain warranty.
Severe Service Check
You need the 5000-mile interval if you:
- Engage in off-road driving or drive on unpaved roads
- Operate the vehicle primarily in stop-and-go conditions
- Leave your vehicle to idle extensively
- Participate in track use or high-performance driving events
Installation Details
Drain Plug Torque: 20 ft-lbs
Oil Filter Housing Cap Torque: 18 ft-lbs (Do not overtighten the plastic cap, typically requires a 24mm or 15/16 socket)
OEM Filter: Mopar 68191349AC
Aftermarket Filters:
-
WIX WL10010
-
FRAM CH11665
-
Purolator L36296
Pro Tip: Remember to lubricate the new O-ring on the oil filter housing cap with fresh engine oil before threading it back onto the engine block.
FAQs
What oil does a 2022 Dodge Charger 3.6L V6 take?
5W-20 full synthetic or synthetic blend oil meeting the Chrysler MS-6395 specification.
How many quarts does it need?
5.9 quarts with a new filter.
Can I use 5W-30 instead?
FCA permits using SAE 5W-30 meeting MS-6395 if 5W-20 is not available, but 5W-20 is the primary recommendation.
Is synthetic oil required?
Although conventional oil is permitted, upgrading to a full synthetic offers far better protection against heat and sludge over a longer interval.
How often should I change the oil?
Generally between 6,000 and 8,000 miles relying on the Oil Change Indicator System (not to exceed 10,000 miles or 12 months). Under severe conditions, every 5000 miles.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-02-25 | Source: 2022 Dodge Charger Owner’s Manual