Complete Oil Specifications
Your 2023 Ford F-250 Super Duty 6.2L V8 requires 5W-30 motor oil meeting the Ford WSS-M2C961-A1 specification.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 5W-30 |
| API Rating | SP |
| ILSAC Rating | GF-6A |
| Capacity (with filter) | 7.4 quarts |
| Oil Filter | Motorcraft FL-820S |
| Normal Interval | 10000 miles |
Why 5W-30 is Critical for This Engine
The naturally aspirated 6.2L “Boss” V8 engine represents the legendary workhorse of the Super Duty fleet, known for high reliability when towing massive loads. The 5W-30 viscosity ensures the oil maintains a stable, protective barrier between vital moving parts even when extreme workload stresses inevitably drive engine temperatures upward.
Using incorrect oil will:
- ❌ Decrease the durability of the engine when subjected to continuous hard acceleration and heavy payloads
- ❌ Negatively impact cam chain tensioner operation due to lack of adequate oil pressure
- ❌ Risk voiding the Ford powertrain warranty, which dictates adhering strictly to the WSS-M2C961-A1 standard
Ford-Approved Oil Brands
-
✅ Motorcraft SAE 5W-30 Synthetic Blend
-
✅ Mobil 1 Advanced Full Synthetic 5W-30
-
✅ Valvoline Advanced Full Synthetic 5W-30
-
✅ Pennzoil Platinum Full Synthetic 5W-30
-
✅ Shell Rotella Gas Truck 5W-30 Full Synthetic
When choosing an oil, always search the rear label for the WSS-M2C961-A1 specification and the API SP starburst.
Severe Service Check
You need the 5000-mile interval (or 6 months/200 engine hours) if you:
- Tow heavy trailers or haul maximum payloads regularly
- Experience extended periods of idling
- Drive mostly short trips in cold weather
- Utilize the truck for specific commercial fleets or off-road conditions
- Drive in extremely dusty operations
Installation Details
Drain Plug Torque: 17 ft-lbs
OEM Filter: Motorcraft FL-820S
Aftermarket Filters:
-
Wix 51372
-
Mobil 1 M1-210A
-
K&N HP-2010
Pro Tip: Because the F-250 sits high off the ground, a standard low-profile drain pan might cause the fast-flowing 7.4 quarts of oil to splash back up. Use an enclosed or deep oil catch pan for a cleaner job.
FAQs
What oil does a 2023 Ford F-250 6.2L take?
It requires a 5W-30 viscosity, meeting API SP and Ford WSS-M2C961-A1 specifications.
How many quarts does it need?
7.4 quarts with a new filter.
Is synthetic oil required?
Ford originally recommends Motorcraft Synthetic Blend, so full synthetic is an optional (but highly recommended) upgrade, especially if you deal with severe towing demands.
How often should I change the oil?
Follow the Intelligent Oil-Life Monitor. Under normal conditions, you’ll reach 10000 miles, 1 year, or 400 engine hours. For heavy towing and idling, this interval will decrease via the monitor to closer to 5000 miles.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-03-17 | Source: 2023 Ford Super Duty Owner’s Manual