2024 GMC Yukon 5.3L EcoTec3 V8 with Dynamic Fuel Management Oil Specifications

Viscosity

0W-20

OEM Spec / API

SP

Capacity

8.0 quarts

Oil Filter

ACDelco PF63E

🔧 Get These Specs On Your Phone

Download OilFinderPro for offline access and oil change reminders

Download Free App

Complete Oil Specifications

Your 2024 GMC Yukon 5.3L V8 requires 0W-20 full synthetic motor oil that meets the dexos1 Gen 3 specification.

Quick Reference

Specification Value
Viscosity 0W-20
API Rating SP
Spec dexos1 Gen 3
Capacity (with filter) 8.0 quarts
Oil Filter ACDelco PF63E
Normal Interval Follow Oil Life Monitor max 1 year

Why dexos1 Gen 3 0W-20 is Critical for This Engine

The 5.3L EcoTec3 V8 in the Yukon utilizes Dynamic Fuel Management (DFM) and advanced variable valve timing. The dexos1 Gen 3 specification is mandatory because it provides superior protection against Low-Speed Pre-Ignition (LSPI) and helps keep critical cylinder deactivation hardware free from deposits.

Using incorrect oil will:

  • ❌ Increase the risk of LSPI, which can cause severe piston damage
  • ❌ Cause sludge buildup, affecting the DFM system solenoids
  • ❌ Compromise high-temperature protection during towing or hauling

GM dexos1-Approved Oil Brands

  • ✅ ACDelco dexos1 Gen 3 Full Synthetic 0W-20

  • ✅ Mobil 1 Extended Performance 0W-20

  • ✅ Castrol Edge with dexos1 Gen 3 0W-20

  • ✅ Pennzoil Platinum dexos1 Gen 3 0W-20

  • ✅ Valvoline Advanced Full Synthetic 0W-20

Always look for the green dexos1 Gen 3 icon on the oil container. Using oil that does not meet this certification can lead to engine damage not covered by your GM warranty.

Severe Service Check

The Yukon’s Oil Life Monitor will calculate shorter intervals (typically every 3,000–5,000 miles) if you:

  • Regularly tow trailers or carry heavy payloads
  • Drive in extremely hot or dusty environments
  • Live in mountainous areas with frequent elevation changes
  • Perform extensive idling (e.g., in heavy traffic or police use)
  • Drive mostly short trips where the engine doesn’t reach operating temperature

Installation Details

Drain Plug Torque: 18 ft-lbs
Do not overtighten—over-torquing risk damaging the oil pan threads.

OEM Filter: ACDelco PF63E (Also replaces earlier part number PF63)

Aftermarket Filters:

  • Mobil 1 M1-212A

  • K&N HP-2011

  • Wix 57045

Pro Tip: This engine is known for its large 8.0-quart oil capacity. Make sure your drain pan is large enough to handle the volume and verify the oil level on the dipstick after a short test drive.


FAQs

What oil does a 2024 GMC Yukon 5.3L V8 take?
0W-20 full synthetic motor oil meeting the GM dexos1 Gen 3 specification.

How many quarts does it need?
8.0 quarts with an ACDelco PF63E filter.

Can I use 5W-30 instead of 0W-20?
No. GM specifies 0W-20 for year-round protection and optimal DFM operation. Using thicker oil will reduce efficiency and performance.

Is synthetic oil required?
Yes. Only full synthetic formulas meet the dexos1 Gen 3 performance requirements.

How often should I change the oil?
Follow the “Change Engine Oil Soon” message on your dashboard. You must change the oil and filter at least once per year regardless of mileage.


Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.

Last verified: 2026-03-07 | Source: 2024 GMC Yukon Owner’s Manual

Disclaimer: The information on this page is provided for general reference purposes only. Specifications may be outdated or inaccurate. Always verify oil type, capacity, and service intervals in your vehicle's official owner's manual before performing maintenance.