2021 Jeep Grand Cherokee 3.6L Pentastar V6 Oil Specifications

Viscosity

0W-20

OEM Spec / API

Chrysler MS-6395 / API SP

Capacity

6.0 quarts

Oil Filter

Mopar 68191349AC

🔧 Get These Specs On Your Phone

Download OilFinderPro for offline access and oil change reminders

Download Free App

Complete Oil Specifications

Your 2021 Jeep Grand Cherokee 3.6L V6 requires 0W-20 synthetic oil meeting Chrysler MS-6395.

Quick Reference

Specification Value
Viscosity 0W-20
Standard Chrysler MS-6395 / API SP
Capacity (with filter) 6.0 quarts
Oil Filter Mopar 68191349AC
Interval max 10,000 miles or 1 year

Why MS-6395 0W-20 is Critical

The 3.6L Pentastar V6 uses Variable Valve Timing (VVT) and Multi-Air technology. It requires Chrysler MS-6395 certified oil for:

  • Proper VVT solenoid operation
  • Protection against start-up wear
  • Maintaining fuel economy

Using incorrect oil (like 5W-30) can lead to Check Engine Lights (P06DD) and VVT issues. Note: This spec applies to both the outgoing WK2 generation and the new WL Grand Cherokee L introduced in 2021.

Jeep-Approved Oil Brands

  • ✅ Pennzoil Platinum 0W-20 Full Synthetic

  • ✅ Mobil 1 Extended Performance 0W-20

  • ✅ Valvoline Advanced Full Synthetic 0W-20

  • ✅ Castrol EDGE 0W-20 Advanced Full Synthetic

  • ✅ Quaker State Ultimate Durability 0W-20

Severe Service Check

The vehicle’s Oil Life Monitor will tell you when to change the oil. Expect to change it sooner (around 4,000 miles) if you:

  • Tow a trailer
  • Drive extensive stop-and-go
  • Off-road or drive in dusty conditions
  • Short trips in freezing temperatures

Installation Details

Drain Plug Torque: 20 ft-lbs
Do not over-tighten.

OEM Filter: Mopar 68191349AC

Aftermarket Filters:

  • WIX WL10010XP

  • K&N PS-7026

  • Mobil 1 M1C-456A

Pro Tip: The oil filter housing is on top of the engine near the intake. Torque the cap to 25 N·m (18 ft-lbs). Overtightening cracks the housing!


FAQs

What oil does a 2021 Jeep Grand Cherokee V6 take?
SAE 0W-20 synthetic oil meeting Chrysler MS-6395.

How many quarts of oil does it hold?
6.0 quarts (5.7 liters).

Can I use 5W-20?
0W-20 is the primary recommendation. 5W-20 can be used temporarily if 0W-20 is unavailable, but switch back at the next service.

How often should I change the oil?
Follow the dashboard Oil Life Monitor. Never go more than 10,000 miles or 1 year.


Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.

Last verified: 2026-02-23 | Source: Needs OEM source confirmation (manual/spec page URL pending).

Disclaimer: The information on this page is provided for general reference purposes only. Specifications may be outdated or inaccurate. Always verify oil type, capacity, and service intervals in your vehicle's official owner's manual before performing maintenance.