Complete Oil Specifications
Your 2022 Toyota Camry 2.5L requires modern 0W-16 low-viscosity synthetic oil.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 0W-16 |
| Standard | API SP / ILSAC GF-6B |
| Capacity (with filter) | 4.8 quarts |
| Oil Filter | Toyota 04152-YZZA6 |
| Normal Interval | 10000 miles or 1 year |
Why 0W-16 is Essential
The 2.5L A25A-FKS engine is designed for ultra-low viscosity oil to maximize fuel economy and cold-start protection. Toyota Recommendation: Use 0W-16. Fallback: If 0W-16 is not available, 0W-20 may be used. However, it must be replaced with 0W-16 at the next oil change.
Toyota-Approved Oil Brands
-
✅ Toyota Genuine Motor Oil 0W-16
-
✅ Mobil 1 Advanced Fuel Economy 0W-16
-
✅ Castrol Edge 0W-16
-
✅ Pennzoil Platinum 0W-16
-
✅ Valvoline Advanced Full Synthetic 0W-16
Look for the API SP and ILSAC GF-6B (shield) certifications.
Severe Service Check
Change oil every 5000 miles or 6 months if you:
- Take frequent short trips (less than 5 miles)
- Drive in extreme heat (above 90°F) or cold
- Idle extensively
- Drive on dusty or unpaved roads
For normal commuting, follow the 10,000-mile or 1-year interval.
Installation Details
Drain Plug Torque: 27 ft-lbs
Use a torque wrench to avoid over-tightening.
OEM Filter: Toyota 04152-YZZA6
Aftermarket Filters:
-
Mobil 1 M1-110A
-
K&N HP-1017
-
Bosch 3330
Location: The oil filter housing is accessible from underneath the vehicle (cartridge style).
FAQs
What oil does a 2022 Camry 2.5L take?
0W-16 full synthetic oil meeting API SP / ILSAC GF-6B.
How many quarts does it need?
4.8 quarts (4.5 liters) with a new filter.
Can I use 5W-20 or 5W-30?
No. 5W-30 is too thick. 0W-20 is allowed only if 0W-16 is unavailable, but must be switched back.
How often should I change the oil?
Every 10,000 miles or 12 months, whichever comes first. Use 5,000 miles/6 months for severe service.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-02-23 | Source: Needs OEM source confirmation (manual/spec page URL pending).