Complete Oil Specifications
Your 2022 Toyota Tacoma 3.5L V6 requires 0W-20 full synthetic oil meeting API SP and ILSAC GF-6A standards.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 0W-20 |
| API Rating | API SP |
| ILSAC Rating | GF-6A |
| Capacity (with filter) | 6.2 quarts (With Tow Package)* |
| Oil Filter | Toyota 04152-YZZA1 (Cartridge Style) |
| Normal Interval | 10000 miles |
*Note: Tacoma V6 models without the factory tow package (no factory oil cooler) require slightly less oil: 6.1 quarts.
Why 0W-20 is Critical for This Engine
The 2GR-FKS 3.5L V6 features Toyota’s D-4S dual-injection system and Atkinson cycle capability. 0W-20 synthetic ensures immediate flow to the complex VVT-iW valvetrain system at cold start, maximizing fuel efficiency and preventing wear on the variable valve timing phasers.
Using incorrect oil will:
- ❌ Risk sluggish VVT system operation
- ❌ Decrease fuel economy
- ❌ Compromise cold weather starting
Toyota-Approved Oil Brands
-
✅ Toyota Genuine Motor Oil 0W-20
-
✅ Mobil 1 Advanced Fuel Economy 0W-20
-
✅ Castrol Edge Extended Performance 0W-20
-
✅ Pennzoil Platinum Full Synthetic 0W-20
-
✅ Valvoline Advanced Full Synthetic 0W-20
Ensure the oil displays the API SP or ILSAC GF-6A starburst shield.
Severe Service Check
Shorten to 5000 miles or 6 months if you:
- Tow a trailer, haul heavy loads, or use a roof-top tent
- Drive off-road, on dusty terrain, or through mud
- Make short trips under 5 miles in freezing temperatures
- Idle extensively at job sites or with remote start
Installation Details
Drain Plug Torque: 30 ft-lbs Replace the crush washer at every service to prevent driveway leaks.
OEM Filter: Toyota 04152-YZZA1
Aftermarket Filters:
-
Mobil 1 Extended Performance M1C-251A
-
Wix 57047
-
K&N PS-7020
Pro Tip: The 3.5L V6 uses a cartridge-style filter canister on the bottom front of the engine, often behind a skid plate. Use a 64mm 14-flute oil filter cup wrench to avoid cracking the housing. Filter housing torque: 18 ft-lbs.
FAQs
What oil does a 2022 Toyota Tacoma 3.5L V6 take? 0W-20 full synthetic oil meeting API SP and ILSAC GF-6A standards.
How many quarts does it need? 6.2 quarts with the tow package (oil cooler). Models without the tow package take 6.1 quarts.
Can I use 5W-20 instead? Toyota permits 5W-20 as a temporary substitute only if 0W-20 is unavailable. Replace with 0W-20 at the next interval.
How often should I change the oil? Every 10000 miles or 12 months for normal driving. Every 5000 miles or 6 months for towing, off-roading, or severe use.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-04-06 | Source: OEM Owner’s Manual