Complete Oil Specifications
Your 2025 Toyota Tacoma equipped with the 2.4L Turbo (T24A-FTS) requires 0W-20 full synthetic oil meeting API SP and ILSAC GF-6A standards.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 0W-20 |
| API Rating | API SP |
| ILSAC Rating | GF-6A |
| Capacity (with filter) | 5.8 quarts |
| Oil Filter | Toyota 90915-YZZF2 |
| Normal Interval | 10000 miles |
Why 0W-20 is Critical for This Engine
The T24A-FTS is an all-new 2.4L turbocharged four-cylinder that replaced Tacoma’s naturally aspirated V6 for 2024. It features a twin-scroll turbocharger, direct injection, and variable valve timing on both intake and exhaust camshafts. 0W-20 full synthetic is mandatory to ensure instant lubrication of the turbocharger bearings at cold start and to maintain the thin oil film tolerances required by the high-compression turbocharged design.
Using incorrect oil will:
- ❌ Starve the turbocharger at cold start, accelerating bearing wear
- ❌ Cause premature wear on the variable valve timing phasers
- ❌ Risk increased carbon deposits on intake valves from the direct-injection system
Toyota-Approved Oil Brands
-
✅ Toyota Genuine Motor Oil 0W-20
-
✅ Mobil 1 Extended Performance 0W-20
-
✅ Castrol Edge Extended Performance 0W-20
-
✅ Pennzoil Platinum Full Synthetic 0W-20
-
✅ Valvoline Advanced Full Synthetic 0W-20
Always confirm the oil displays the API SP certification mark or the ILSAC GF-6A starburst symbol. This ensures the oil contains the correct additives to protect turbocharged direct-injection engines.
Severe Service Check
You need the 5000-mile interval if you:
- Tow a trailer or haul heavy loads in the bed regularly
- Drive off-road, on dusty terrain, or through mud and water crossings
- Primarily make short trips under 5 miles in cold weather
- Operate on job sites with extended idling periods
Installation Details
Drain Plug Torque: 30 ft-lbs Replace the aluminum crush washer at every service — reuse causes seepage.
OEM Filter: Toyota 90915-YZZF2
Aftermarket Filters:
-
Mobil 1 M1C-251A
-
Wix 57256
-
K&N PS-7024
Pro Tip: The T24A-FTS uses a cartridge-style oil filter housed in a canister on the engine. Use a 64mm cap-style filter wrench to remove it without cracking the housing. Torque the filter canister cap to 18 ft-lbs — do not overtighten.
FAQs
What oil does a 2025 Toyota Tacoma 2.4L Turbo take? 0W-20 full synthetic meeting API SP and ILSAC GF-6A standards.
How many quarts does it need? 5.8 quarts with a new filter, 5.5 quarts without.
Can I use 5W-20 or 5W-30 instead? No. Toyota specifies 0W-20 exclusively for the T24A-FTS. Using a heavier viscosity reduces cold-start oil flow to the turbocharger and affects fuel economy.
Is synthetic oil required? Yes. The T24A-FTS is factory-filled with full synthetic and Toyota requires full synthetic for all subsequent oil changes.
How often should I change the oil? Every 10000 miles for normal driving, or every 5000 miles for severe service including towing, off-road use, and dusty conditions.
Does the new Tacoma still use a cartridge filter? Yes. Like the outgoing V6, the 2.4T uses a cartridge filter in a canister housing rather than a spin-on filter.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-03-25 | Source: 2025 Toyota Tacoma Owner’s Manual