Complete Oil Specifications
Your 2022 Toyota Tundra with the 3.5L V35A-FTS twin-turbocharged V6 requires 0W-20 full synthetic oil meeting API SP / ILSAC GF-6A. This page covers the standard (non-hybrid) V35A-FTS engine only. If your Tundra has the iForce MAX hybrid powertrain, consult a separate specification — the hybrid variant has different service requirements.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 0W-20 |
| API Rating | API SP |
| ILSAC Rating | GF-6A |
| Capacity (with filter) | 7.7 quarts |
| Oil Filter | Toyota 90915-YZZJ2 |
| Normal Interval | 10000 miles or 1 year |
The 2022 Tundra’s Engine Revolution
The 2022 model year marked a complete redesign of the Tundra. Toyota replaced the legendary 5.7L V8 (2UR-FE) with an entirely new 3.5L twin-turbo V6 (V35A-FTS). This engine produces more torque than the V8 it replaced while achieving significantly better fuel economy — a major engineering achievement.
The V35A-FTS features:
- Twin turbochargers with a water-cooled intercooler system
- Direct and port injection (D-4ST dual-injection)
- Variable valve timing on both intake and exhaust (VVT-iE electric + VVT-i hydraulic)
- Segment-leading towing capacity for a V6 truck engine
Why 0W-20 for a Twin-Turbo Truck Engine
The V35A-FTS twin-turbo architecture uses two turbochargers that must be lubricated quickly after every cold start. 0W-20 reaches the turbo bearing journals in under 2 seconds at cold temperatures, compared to 5–7 seconds for a conventional 5W-30.
Using incorrect oil will:
- ❌ Increase turbocharger bearing wear during cold-start lubrication delay
- ❌ Disrupt VVT-i hydraulic cam phaser actuation, affecting torque delivery
- ❌ Create excess heat in the twin-turbo cooling oil circuits
Toyota-Approved Oil Brands
-
✅ Toyota Genuine Motor Oil 0W-20
-
✅ Mobil 1 Extended Performance 0W-20
-
✅ Pennzoil Ultra Platinum Full Synthetic 0W-20
-
✅ Castrol Edge Extended Performance 0W-20
-
✅ Valvoline Advanced Full Synthetic 0W-20
Look for the API SP certification and ILSAC GF-6A starburst on the bottle. These standards include mandatory LSPI protection — critical for the V35A-FTS’s direct injection.
iForce MAX Hybrid — Important Note
This page covers the non-hybrid V35A-FTS only. The iForce MAX variant pairs the same V6 with an electric motor and has a different oil capacity. Do not use this page for iForce MAX Tundras.
Severe Service Check
Use the 5000 interval if you:
- Tow heavy trailers at or near maximum capacity (12,000+ lbs)
- Haul maximum payload in the bed regularly
- Drive frequently off-road on dusty or unpaved surfaces
- Operate in extreme heat or cold
Installation Details
Drain Plug Torque: 27 ft-lbs
OEM Filter: Toyota 90915-YZZJ2
Aftermarket Filters:
-
Mobil 1 M1-212A
-
WIX 57060XP
-
K&N HP-7040
Pro Tip: The V35A-FTS holds 7.7 quarts — substantially more than most V6 engines due to the twin-turbo oil cooling demands. Always verify oil level with the dipstick; do not rely on the pour count when switching from a different engine configuration.
FAQs
What oil does a 2022 Toyota Tundra 3.5L V6 take?
0W-20 full synthetic engine oil meeting API SP / ILSAC GF-6A.
How many quarts does the 2022 Tundra hold?
7.7 quarts with a new filter.
Does the 2022 Tundra really not have a V8 option?
Correct. The 2022 redesign eliminated the 5.7L V8. The only engine options are the standard 3.5L twin-turbo V6 and the iForce MAX 3.5L twin-turbo hybrid V6.
Is the 2022 Tundra V6 as good as the old V8?
The V35A-FTS produces 389 hp and 479 lb-ft of torque — exceeding the old 5.7L on torque by approximately 14%. Towing capacity is comparable or better. Most owners report superior real-world performance with better fuel economy.
How often should I change the oil on the 2022 Tundra?
Every 10,000 miles or once per year. Increase to 5,000-mile intervals for severe towing or off-road use.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-02-27 | Source: 2022 Toyota Tundra Owner’s Manual (OM0G073U)