Complete Oil Specifications
Your 2022 Peugeot 2008 A94 1.2 PureTech 130 requires 0W-20 full synthetic oil meeting the PSA B71 2010 specification and ACEA A3/B4 standard.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 0W-20 |
| Standard | PSA B71 2010 / ACEA A3/B4 |
| Capacity (with filter) | 3.8 quarts |
| Oil Filter | Peugeot/Citroën 1109CQ |
| Normal Interval | 10000 miles or 12 months |
Why PSA B71 2010 Matters for the PureTech Wet Belt
The EB2ADTS/HN05 PureTech 130 is a 3-cylinder turbocharged engine with an oil-immersed timing belt — PSA’s signature “wet belt in oil bath” design. It is mechanically quieter and more compact than a conventional timing chain, but requires precise oil chemistry:
- B71 2312 / ACEA C2 oils degrade the wet belt: The mid-SAPS additive chemistry in ACEA C2 oils interacts adversely with the belt’s elastomer compound, causing swelling and accelerated wear. This is a documented issue PSA addressed by mandating B71 2010 (ACEA A3/B4, 0W-20) for 2020+ PureTech production.
- 0W-20 fast cold-flow: The wet belt is particularly vulnerable during cold starts before oil reaches the belt sump. The low cold-viscosity (0W) ensures oil reaches the belt within seconds at low temperatures.
PSA issued technical service bulletins following field failures on earlier PureTech engines where B71 2312 / 5W-30 oil was used. The 2022 2008 uses a revised belt and mandates B71 2010 to prevent recurrence.
Peugeot-Approved Oil Brands
-
✅ Total Quartz 9000 Future 0W-20 (PSA B71 2010 certified)
-
✅ Castrol Edge 0W-20
-
✅ Shell Helix Ultra ECT C5 0W-20
-
✅ Mobil 1 ESP LV 0W-20
-
✅ Liqui Moly Longtime Top 0W-20
Look for PSA B71 2010 on the label. Do not use ACEA C2 or any oil labelled B71 2312, regardless of viscosity.
Severe Service Check
You need the 5000-mile interval if you:
- Take predominantly short trips under 5 miles (prevents oil from reaching full operating temperature)
- Drive heavily in urban stop-and-go traffic
- Experience ambient temperatures consistently below -15°C
- Use the vehicle for towing or sustained uphill/high-speed driving
Installation Details
Drain Plug Torque: 15 ft-lbs (20 Nm) — M14×1.5 thread
OEM Filter: Peugeot/Citroën 1109CQ
Aftermarket Filters:
-
Mann-Filter HU 68 x
-
Mahle OC 479
-
WIX 57034
FAQs
What oil does a 2022 Peugeot 2008 PureTech 130 take? 0W-20 full synthetic oil meeting PSA B71 2010 and ACEA A3/B4.
Is the PureTech 130 the same engine as in the 208? Yes — the EB2ADTS/HN05 PureTech 130 is shared across multiple PSA/Stellantis models. The oil specification (B71 2010, 0W-20) is the same.
How many quarts does it need? 3.8 quarts with a new filter, 3.5 without.
Can I use 5W-30 ACEA C2? No. ACEA C2 chemistry degrades the wet timing belt on this engine. Only PSA B71 2010 / 0W-20 is approved.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-05-27 | Source: 2022 Peugeot 2008 A94 Owner’s Manual