2022 Ford Kuga 1.5L EcoBoost 150 Turbocharged 3-Cylinder (B5HNIA) Oil Specifications

Viscosity

5W-20

OEM Spec / API

Ford WSS-M2C948-B / ACEA A1/B1

Capacity

4.8 quarts

Oil Filter

Ford BV6Q 6714 AA

🔧 Get These Specs On Your Phone

Download OilFinderPro for offline access and oil change reminders

Download Free App

Complete Oil Specifications

Your 2022 Ford Kuga 1.5 EcoBoost 150 requires 5W-20 full synthetic oil meeting the Ford WSS-M2C948-B specification.

Quick Reference

Specification Value
Viscosity 5W-20
Ford Standard Ford WSS-M2C948-B / ACEA A1/B1
Capacity (with filter) 4.8 quarts
Oil Filter Ford BV6Q 6714 AA
Normal Interval 15000 km

Why WSS-M2C948-B 5W-20 Is Required

The 1.5L 3-cylinder EcoBoost in the Kuga uses an integrated exhaust manifold cast directly into the aluminium cylinder head, concentrating exhaust heat near the turbo. This thermal environment demands the high oxidation resistance and deposit-control chemistry of Ford WSS-M2C948-B — a specification developed to protect EcoBoost turbocharged engines beyond the capabilities of the older WSS-M2C913-D. In an SUV application like the Kuga, the engine also experiences sustained high-load conditions during towing and motorway cruising, making the correct oil formulation especially important.

Using incorrect oil will:

  • ❌ Allow coking deposits in the turbo oil feed line at high exhaust temperatures
  • ❌ Fail Ford’s mandatory EcoBoost specification even if viscosity is correct
  • ❌ Accelerate timing chain wear under sustained high-load conditions

Ford-Approved Oil Brands

  • ✅ Castrol EDGE Professional A1/B1 5W-20 (Ford WSS-M2C948-B)

  • ✅ Motorcraft Premium Synthetic 5W-20

  • ✅ Shell Helix Ultra Professional AF 5W-20

  • ✅ Total Quartz INEO First 5W-20

  • ✅ Mobil 1 Advanced Fuel Economy 5W-20

Confirm the label shows Ford WSS-M2C948-B. This is the mandatory EcoBoost specification — not interchangeable with the older M2C913-D for naturally aspirated engines.

Severe Service Check

You need the 10000-km interval if you:

  • Tow a trailer or caravan regularly
  • Drive predominantly short urban trips under 8 km
  • Drive frequently at maximum payload (full SUV with luggage)
  • Operate in extreme heat above 35°C for sustained periods

Installation Details

Drain Plug Torque: 20 ft-lbs (27 Nm)

OEM Filter: Ford BV6Q 6714 AA

Aftermarket Filters:

  • Mann HU 7009 z

  • Mahle OX 716

  • WIX WL7096

Pro Tip: If you tow with the Kuga regularly, switch to the 10,000 km severe-service interval regardless of how the Intelligent Oil Life Monitor reads. The monitor calculates degradation based on typical driving profiles; sustained towing loads exceed its assumptions.


FAQs

What oil does a 2022 Ford Kuga 1.5 EcoBoost take?
5W-20 full synthetic oil meeting Ford WSS-M2C948-B.

How many quarts does it need?
4.8 quarts with a new filter, 4.5 without.

Can I use 5W-30 in the Kuga instead of 5W-20?
Ford specifies 5W-20 for EcoBoost. A 5W-30 does not meet WSS-M2C948-B and slightly increases cold-start friction losses, reducing the fuel economy benefit of the 3-cylinder layout.

Is the Kuga 1.5 EcoBoost related to the Fiesta’s 1.0 EcoBoost?
Both use the EcoBoost family architecture with integrated exhaust manifolds, but are different displacements and engine codes. They share the same WSS-M2C948-B oil specification.

How often should I change the oil?
Every 15,000 km or 12 months for normal driving. Every 10,000 km for towing or short-trip use.


Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.

Last verified: 2026-05-21 | Source: 2022 Ford Kuga Owner’s Manual

Disclaimer: The information on this page is provided for general reference purposes only. Specifications may be outdated or inaccurate. Always verify oil type, capacity, and service intervals in your vehicle's official owner's manual before performing maintenance.