Complete Oil Specifications
Your 2024 Ford Ranger 2.3L EcoBoost requires 5W-30 full synthetic or synthetic blend oil meeting Ford specification WSS-M2C961-A1, API SP, and ILSAC GF-6A. The redesigned third-generation Ranger uses the same proven 2.3L EcoBoost as its predecessor but with revised power output (270 hp vs. 270 hp) and updated engine management for improved towing capability.
Quick Reference
| Specification | Value |
|---|---|
| Viscosity | 5W-30 |
| API Rating | SP |
| ILSAC Rating | GF-6A (WSS-M2C961-A1) |
| Capacity (with filter) | 6.0 quarts |
| Oil Filter | Motorcraft FL-910S |
| Normal Interval | 10000 miles |
Why 5W-30 is Critical for This Engine
The 2.3L EcoBoost uses port and direct injection (PFDI), a twin-scroll turbocharger, and a cast-iron cylinder block for the durability required of a truck engine. Ford specifies 5W-30 — heavier than the 0W-20 used in some passenger car EcoBoost applications — because the Ranger’s turbocharged 4-cylinder frequently operates under sustained towing and off-road load that benefits from the additional high-temperature film strength of 5W-30.
Using incorrect oil will:
- ❌ Reduce turbocharger bearing protection under sustained boost and towing
- ❌ Increase LSPI risk if a non-GF-6A oil is used (relevant to all EcoBoost direct injection engines)
- ❌ Fail the Ford WSS-M2C961-A1 specification, potentially affecting warranty coverage
Ford-Approved Oil Brands
-
✅ Motorcraft Synthetic Blend 5W-30 (WSS-M2C961-A1)
-
✅ Mobil 1 Extended Performance 5W-30
-
✅ Valvoline Advanced Full Synthetic 5W-30
-
✅ Castrol EDGE Full Synthetic 5W-30
-
✅ Pennzoil Platinum Full Synthetic 5W-30
Ford’s own Motorcraft brand is fully approved. Any oil meeting WSS-M2C961-A1 (which is printed on compliant containers) satisfies the factory requirement.
Severe Service Check
You need the 5000-mile interval if you:
- Tow a trailer, boat, or off-road vehicle regularly
- Drive off-road with frequent engine lugging
- Work the Ranger as a utility or work truck with heavy bed loads
- Operate in extreme dust, mud, or water crossing conditions
Installation Details
Drain Plug Torque: 26 ft-lbs
OEM Filter: Motorcraft FL-910S
Aftermarket Filters:
-
Wix 51348
-
Fram XG3614
-
Mobil 1 M1-102A
Pro Tip: The 2024 Ranger’s oil drain plug is accessible from below with minimal underbody clearance — use a proper floor jack and stands rather than relying solely on the factory jack points.
FAQs
What oil does a 2024 Ford Ranger 2.3L EcoBoost take? 5W-30 full synthetic or synthetic blend meeting Ford WSS-M2C961-A1, API SP, and ILSAC GF-6A.
How many quarts does it need? 6.0 quarts with a new filter, 5.7 without.
Can I use 0W-20 or 5W-20 in the 2.3L EcoBoost? No. Ford specifies 5W-30 for the Ranger application. The lighter viscosities are used in car-based EcoBoost engines but are not approved for the truck-duty Ranger.
Is synthetic oil required? Full synthetic is recommended; Ford-approved synthetic blends (such as Motorcraft) also meet the WSS-M2C961-A1 spec.
How often should I change the oil? Every 10000 miles for normal driving. Follow the Intelligent Oil-Life Monitor; do not exceed 1 year without a change regardless of the display.
Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.
Last verified: 2026-05-31 | Source: 2024 Ford Ranger Owner’s Manual