2023 Lexus LX 600 3.5L V35A-FTS Twin-Turbo V6 (409 hp) Oil Specifications

Viscosity

0W-20

OEM Spec / API

SP

Capacity

7.0 quarts

Oil Filter

Toyota 04152-YZZA4

🔧 Get These Specs On Your Phone

Download OilFinderPro for offline access and oil change reminders

Download Free App

Complete Oil Specifications

Your 2023 Lexus LX 600’s 3.5L V35A-FTS twin-turbo V6 requires 0W-20 full synthetic oil meeting API SP and ILSAC GF-6A standards. The V35A-FTS is a high-output, twin-turbocharged engine paired with a 10-speed automatic and multi-terrain crawl control — oil quality and capacity are critical for both on-road performance and off-road thermal management.

Quick Reference

Specification Value
Viscosity 0W-20
API Rating SP
ILSAC Rating GF-6A
Capacity (with filter) 7.0 quarts
Oil Filter Toyota 04152-YZZA4
Normal Interval 10000 miles

Why 0W-20 is Critical for This Engine

The V35A-FTS uses Toyota’s D-4ST dual-injection system (both port and direct injection), twin turbochargers, and VVT-iW variable valve timing on the intake camshaft. Cold-start lubrication of twin turbo bearing housings is critical within the first seconds of startup. 0W-20’s low cold-flow resistance reaches turbo bearings faster than heavier grades, and its GF-6A certification ensures LSPI (low-speed pre-ignition) protection for the turbocharged direct-injection combustion system.

Using incorrect oil will:

  • ❌ Increase turbocharger bearing wear during cold starts
  • ❌ Potentially trigger LSPI events in a turbocharged DI engine with wrong additive chemistry
  • ❌ Reduce fuel economy measurably on the combined cycle

Lexus-Approved Oil Brands

  • ✅ Toyota/Lexus Genuine Motor Oil 0W-20

  • ✅ Mobil 1 Advanced Fuel Economy 0W-20

  • ✅ Castrol Edge 0W-20

  • ✅ Pennzoil Platinum Full Synthetic 0W-20

  • ✅ Valvoline Advanced Full Synthetic 0W-20

Look for API SP and ILSAC GF-6A on the container. Toyota Genuine 0W-20 is the OEM fill oil and meets all LX 600 requirements.

Severe Service Check

You need the 5000-mile interval if you:

  • Tow at or near the 8,000 lb rated capacity regularly
  • Use the LX 600 for sustained off-road driving with crawl control
  • Operate in ambient temperatures consistently above 100°F
  • Drive in sand or deep mud conditions regularly

Installation Details

Drain Plug Torque: 30 ft-lbs

The LX 600 uses a steel oil pan with a reusable drain plug gasket — inspect the gasket for deformation and replace if necessary. Lexus recommends replacing the gasket every other oil change.

OEM Filter: Toyota 04152-YZZA4

Aftermarket Filters:

  • Mobil 1 M1C-453A

  • K&N HP-1015

  • Fram XG10575

Pro Tip: The LX 600 has a cartridge-style oil filter element inside a housing mounted on the front of the engine block. Use a 64 mm cap wrench to avoid cracking the plastic housing.


FAQs

What oil does a 2023 Lexus LX 600 take? 0W-20 full synthetic oil meeting API SP and ILSAC GF-6A standards.

How many quarts does it need? 7.0 quarts with a new filter, 6.6 without.

Can I use 5W-30 if 0W-20 isn’t available? Toyota does not recommend substituting a heavier grade. In an emergency, 5W-30 API SP is an acceptable temporary fill, but switch back to 0W-20 at the next service.

Is full synthetic required? Yes — API SP and ILSAC GF-6A are full-synthetic specifications for turbocharged engines.

How often should I change the oil? Every 10000 miles for normal driving; every 5000 miles for towing or sustained off-road use.


Need these specs on your phone? Download OilFinderPro app for offline access and oil change reminders.

Last verified: 2026-06-06 | Source: 2023 Lexus LX 600 Owner’s Manual (OM60P22U)

Disclaimer: The information on this page is provided for general reference purposes only. Specifications may be outdated or inaccurate. Always verify oil type, capacity, and service intervals in your vehicle's official owner's manual before performing maintenance.