Complete Oil Specifications
Toyota’s owner’s manual for the 2023 Corolla with the 2.0L M20A-FKS engine calls for Toyota Genuine Motor Oil or an equivalent JASO GLV-1 oil, with a recommended viscosity of SAE 0W-8. Oil capacity is 4.9 qt (4.6 L) with the filter and 4.5 qt (4.3 L) without it.
0W-8, Not 0W-16
Many listings give 0W-16 for this engine, but Toyota’s recommended viscosity is SAE 0W-8, which it describes as the best choice for fuel economy and cold starting. If 0W-8 isn’t available you can use SAE 0W-16, but it must be replaced with 0W-8 at the next oil change. Look for JASO GLV-1 on the container, because that’s the grade Toyota specifies for 0W-8.
Checking the Level After a Change
Toyota’s capacity figures are a reference for a drain and refill. After refilling, warm up the engine, turn it off, wait more than 5 minutes, and check the level on the dipstick before adding more.
What We Couldn’t Confirm
- Oil change interval. Toyota publishes it in the separate Warranty & Maintenance Guide rather than in this owner’s manual section.
- OEM oil filter part number and drain plug torque. Neither appears in the owner’s manual section used here.
FAQs
What oil does a 2023 Toyota Corolla 2.0L take? Toyota Genuine Motor Oil or an equivalent JASO GLV-1 oil in SAE 0W-8.
Can I use 0W-16 or 0W-20? The manual allows SAE 0W-16 only if 0W-8 isn’t available, and it must be replaced with 0W-8 at the next oil change. It does not list 0W-20 for this engine.
How much oil does the 2023 Corolla 2.0L hold? 4.9 qt (4.6 L) with the filter; 4.5 qt (4.3 L) without it.